Farmers experience challenges when storing their potatoes after harvests because of their perishable nature.
Secondly,they are sensitive to sunlight; they turn green when exposed to it, thus become unsuitable for planting or consumption.
The exposure leads to the production of toxins known as solanin.
For the farmer to avoid loses when the potatoes turn green, or when they rot, he should take extra care.
A step by step process of avoiding such losses has been discussed here.
Every potato farmer has two storage objectives.
- To store part of his harvest as seed for the next season.
- To store the excess harvest for the market prices to improve.
Procedure of preparing potato seed for storage
The objective of seed storage is to have optimum development of sprouts prior to planting. This can only be achieved by the appropriate pre and post harvest treatment of the seed.
The first step harden potatoes, This is achieved by cutting off the stems at the base two weeks before harvest. This treatment reduces the loss moisture from the potatoes after harvest.
After harvest sort out potatoes immediately; only egg sized potatoes are suitable for seed.
All bruised potatoes should be removed; they are easily affected by disease, rotting agents, tuber weevils and may infect the rest if stored together.
Potatoes meant for seed shouldn’t be washed as the water may be contaminated by bacteria or fungi.
After the aforesaid is done, put the potatoes in sisal bags and place them on raised platforms or on a dry floor inside a rat proofed store.
Avoid synthetic bags to store potatoes; Sisal bags are better as they allow circulation of air. Alternatively, store them in net bags that allow sunlight and ventilation.
Do not store potatoes in direct sunlight, they turn green and cannot be used as seed or even for consumption.
The store should face an East-West direction to reduce the amount of light getting into the stores.
If an ordinary store is used, the seed potatoes should be covered with grass to help them sprout and reduce the amount of light getting to potatoes.
Good seed potatoes should be well sprouted; they should have a uniform sprout in all eyes. Potato sprouts should be at least 2 cm in length before transplanting.
STORING POTATOES MEANT FOR CONSUMPTION/ware potatoes
Potatoes meant for consumption are also known as ware potatoes.
After tubers are dug out, they should be well dried [a process known as curing] while ensuring they aren’t exposed to the sun, rain or wind.
When two weeks are over, they’ll have thickened skins and any nicks will have healed.
Whether the potatoes are placed in bins, bags or boxes the main consideration is air circulation.
For this reason a slated box is the best. The atmosphere should have a high relative humidity the preferably 90%, temperatures should be between 15-20 degrees to allow slow respiration of the tubers.
Exposing tubers to light hastens sprouting and produces a green color or sunburn hence potatoes should be covered or shaded from light.
As the storage season advances, potatoes should be examined from time to time, if sprouting is observed, remove the sprout and reject the damaged and diseased tubers.
USING SAWDUST DURING STORAGE OF POTATOES
Potatoes are sorted for storage by removing those that are bruised, those with tuber moth holes and rotting ones.
Farmers then spread a thick layer of sawdust across the clean floor on the store.
They then spread the potatoes on the sawdust to cover the potatoes. This method is able to extend shelf life for up to 5 months without any sign of damage.
Using this method may benefit farmers to store their surplus potatoes until the market prices are favorable.